Flux cored wires FCAW

 Flux-cored wires:

FILTUB 12 M

FILTUB 12M is metal-cored wire recommended for welding similar types of steels, including fine-grained steels. Because metal cored wires do not result in a slag covering the weld, they  ombine the benefits of the high deposition rates found in flux cored wires and the high efficiency rates of solid wires. Particularly suitable for robot  and automatic welding. Features of this wire included good bead appearance with small spatte, no slag and therefore without cleaning between runs, good  restricking characteristics and high mechanical properties at low temperatures.

FILTUB 32 M

FILTUB 32M is metal-cored medium alloy flux-cored wire recommended for welding high-strength fine-grain structural steels and creep resistant fine-grain structural steels. Optimal results are obtained at a heat input of E < 18 kJ / cm and at an interpass temperature of 100 - 150 °C . Features of this wire included stable arc with no spatter , regular bead appearance and no slag. Especially is suitable for automated and robotized applications.

FILTUB 4R

FILTUB 4R is rutile flux-cored wire suitable for welding similar types of steel sincluding fine-rain structural steels, shipbuildung steels and pipe steels. It features good weldability in all positions, low spetter losses, excellent bead appearance and good slag detachability. The welding with high current consequently giving a high deposition rate.

FILTUB 5 R

FILTUB 5R is rutile flux-cored wire suitable for welding steel resistant to atmosferic corrosion such as CORTEN, Patinax, Acor, etc. Features of this wire include good weldability in positions, good bead appearance and easy slag removal.

FILTUB 6 R

FILTUB 6R is rutile flux-cored wire suitable for welding weatherproof steels. For welding thick workpieces and for use under high resistant conditions is better  suited FILTUB 40B. Features of this wire include good weldability in positions, good bead appearance and easy slag removal.

FILTUB 7 R

FILTUB 7R is rutile nickel alloy tulbar flux-cored wire suitable for welding fne-grain structural steels and high strength steels up to tensile strengt 580 N/mm2 and good notch toughness up to - 40°C. Its features include good weldability in all all positions for diameters F 1,2 and 1,4 mm, good slag detachability, fine bead appearance and low spatter losses. Particularly suitable for mechanised circumferential pipe welding.

FILTUB 8 R

FILTUB 8R is rutile molibden alloy tubular flux-cored wire recommended for welding creep resistant boiler plates, pressure pipe steels and fine-grain structural steels resistant to creep up to 520°C. Rutile all-positional flux-cored wire with high deposition rate by welding with high currents. Features of this wire included stabile arc with minimal spatter, good slag detachability and fine bead appearance.

FILTUB 12 B

FILTUB 12B is basic flux-cored wire suitable for welding non-alloyed structural steels, boiler plates, pipe steels age-esistant steels, shipbuildung steels and fine-grain structural steels. Also is suitable for welding steels with high C content. Its features include high grade mechanical properties at low temperatures, low hydrogen quality weld metal with a high resistance to cracking in joints  under restraint, good  weldability, low spatter and easy slag removal.

FILTUB 14 B

FILTUB 14B is basic flux-cored wire recommended for welding creep resistant boiler plates, pipe steels and fine-grain structural steels up to operating  temperatures of 500°C. Features of this wire included stable arc with low spatter, regular bead appearance and good slag detachability.

FILTUB 16 B

FILTUB 16B is basic flux-cored wire recommended for welding creep resistant CrMo-alloy boiler plates, pipe steels and cast steels for service temperatures up to 500°C. Preheating dependent on thicknes 160 - 190°C is essential followed by post weld heat treatment at 700°C. Features of this wire included stable arc with low spatter, regular bead appearance and good slag detachability.

FILTUB 18 B

FILTUB 18B is basic flux-cored wire recommended for welding creep resistant 2,2 % Cr and 1,0 % Mo  alloy boiler plates and pipe steels for service temperatures up to 600°C. Preheat and interpass temperatures 175 ± 15°C. Postweld annealing at 690 - 720°C 1 - 2 h and cooling down to 300°C in furnace. Feattures of this wire included stablearc with low spatter, regular bead appearance and good slag detachability.

FILTUB 19 B

FILTUB 16B is basic flux-cored wire recommended forwelding creep resistant 3,0% Cr Mo V alloyed boiler plates and pipe steels for service temperatures up to 600°C. Preheat and interpass temperatures 200 - 250°C. Postweld annealing at 690 - 710°C  1 - 2 h  and cooling down to 300°C. Features of this wire included stable arc with low spatter, regular bead appearance and good slag detachability.

FILTUB 25 B

FILTUB 25B is basic flux-cored wire recommended for welding creep resistant CrMoV-alloy steels and cast steels for service temperatures up to 550°C. Preheat and  interpass temperatures 170 - 200 °C. Postweld annealing at 690-710°C 1-2 h  and cooling down to 300°C in furnace. Features of this wire included stable arc with low spatter, regular bead appearance and good slag detachability.

FILTUB 28 B

FILTUB 28B is medium alloy basic flux cored wire recommended for welding fine-grain structural steels and creep resistant fine-grain  structural steels up to yield strength of 600 N/mm2. Features of this wire included excellent mechanical properties at low temperatures, stable arc with low spatter, regular bead appearance and good slag detachability.

FILTUB 32 B

FILTUB 32B is basic medium alloy flux-cored wire recommended for welding high-strength fine-grain struc-tural steels and creep resistant fine-grain structural steels. Optimal results are obtained at a heat input of E L 15 kJ / cm and at an interpass temperature of 100-150°C. Features of this wire included stable arc with low spatter, regular bead appearance and good slag detachability.

FILTUB 36 B

FILTUB 36B is medium alloy highly basic type flux cored wire recommended for welding fine grain structural steels and cryolitic steels. Optimal results are obtained at a heat input of E L 12 kJ/cm and interpass temperatures schould not exceed 120°C. Features of this wire included stable arc with low  spatter, regular bead appearance and good slag detachability.

FILTUB 38 B

FILTUB 38B is medium alloy highly basic type flux cored wire recommended for welding high-strength fine grain structural steels with yield strength up to 880 N/mm2. Optimal results are obtained at a heat input of E L 15 kJ/cm and interpass temperatures schould not exceed 150 °C. Features of this wire included stable arc with low spatter, regular bead appearance and good slag detachability.

FILTUB 40 B

FILTUB 40B is highly basic medium alloy lux-cored wire recommended for welding NiCu-alloyed steels, resistant to atmospheric corrosion and fine-grain structural steels such as Corten, Patinax, Acor and similar Features of this wire included excellent mechanical properties at low temperatures, stable arc with low spatter, regular bead appearance and good slag detachability.

FILTUB 42 B

FILTUB 42B is highly basic medium alloy flux-cored wire recommended for welding and hardsurfacing of forming and stamping tools dies, rollers and similar  components. Preheating  and interpass  emperatures schould be adjusted depending on the base material. Mechanical  properties of weld metal dependent upon heat treatment. Features of this wire included stable arc with low spatter, regular bead appearance and good slag detachability.

FILTUB DUR 3

FILTUB DUR 3 is metal medium alloyed flux-cored wire recommended for wear-resistant and impact-resistant surfacing in the medium hardness range. It is also useful as a buffer layer of difficult-to-weld steels. The temperature betwen runs schould  not exceed 250°C. The deposit is good machineable and suitable for flame and induction hardening. Suitable for surfacing parts of: caterpilar track rollers, guide rolls, railway tyres, runing wheels, etc.

FILTUB DUR 5

FILTUB DUR 5 is metal medium alloyed flux-cored wire recommended for hardsurfacing of steels in the medium hardness range. The deposit is tough, free of cracks and porosity and therefre is highly resistant to deformation and impact. On base materials with low weldability is recommended depositing a buffer layer with FILTUB 12B. The temperature betwen runs schould not exceed 250°C. Machineable with ordinary cutting tools is posible. Suitable for surfacing parts of: crane wheels, wheels for mine trucks, pulleys, rollers, wobblers, catterpillar track rollers etc.

FILTUB DUR 12

FILTUB DUR 12 is metal medium alloyed flux-cored wire recommended for wear resistant surfacing. The deposit is tough, free of cracks  and porosity  and therefore is highly resistant to deformation and impact. On the base material with low weldability is recommended depositing a buffer layer with FILTUB 12B. The temperature betwen runs schould not exceed 250 °C. The weld metal is still machineable by means of sintered carbide tools. Suitable for surfacing parts of: supports, bearing surfaces, rollers, excavator parts etc.

FILTUB DUR 14

FILTUB DUR 14 is metal medium alloyed flux-cored wire recommended for high wear resistant surfacing. The deposit is tough, free of cracks and porosity and therefore is highly resistant to deformation and impact. On base material with low  weldability is recommended depositing a buffer layer with FILTUB 12B. The preheat and interpass temperature must be at least 200°C. Weld deposit can be machined only by grinding. Suitable for surfacing parts of: mixer blades and vessels, grab and bucket teeths, crusher hammers and jaws etc.

FILTUB DUR 15.1

FILTUB DUR 15.1 is metal medium alloy flux-cored wire recommended for hardsurfacing which martensitic deposit giving a very good resistance to solid erosion wear with heavy impact. The deposit is tough, free of cracks and porosity and therefore is highly resistant to deformation and impact. On base material with low weldability is recommended depositing a buffer layer with FILTUB 12B or FILTUB DUR 3. The preheat and interpass temperature must be at least  250°C Suitable for surfacing parts of: impact rockdrills, bucket teeth and lips, screw conveyours, etc.

FILTUB DUR 16

FILTUB DUR 16 is basic medium alloy flux-cored wire recommended for highly wear resistant surfacing. The deposit is tough, free of cracks and porosity and therefore is highly resistant to deformation and impact. On base material with low weldability is recommended depositing a buffer layer with FILTUB 12B or FILTUB DUR 3. The preheat and interpass temperature must be at least  200 °C. Weld deposit can be machined only by grinding. Suitable for surfacing parts of: mixer blades and vessels, grab and bucket teeths, crusher hammers and jaws etc.

FILTUB UTOP 38

FILTUB UTOP 38 is metal medium alloy  flux-cored wire recommended for hot and cold work tools surfacing. The deposit is tough, free of cracks and porosity and therefore is highly resistant to deformation and impact. The weld metal is still machineable by means of sintered carbide tools. On the base material with low weldability is recommended depositing a buffer layer with FILTUB 12B. Suitable for hardsurfacing cold and hot working tools such as: screws, nuts, dies and containers for metal tube and rod extrusion tools for manufacture of hollow bodies, pressure die casting dies etc.

FILTUB UTOP 55

FILTUB UTOP 55 is basic medium alloy flux-cored wire recommended for hardsurfacing of cold and hot-working steel tools up to operating temperatures of 550°C. The deposit is tough, free of cracks and the-refore is highly resistant to deformation and impact. Weld deposit can be machined only by grinding. On base material with low weldability is recommended depositing a buffer layer with FILTUB 12B. Suitable for hardsurfacing cold and hot working tools such as: screws, nuts, dies and containers for metal tube and rod  extrusion tools for manufacture of hollow bodies, hot shear blades, pressure die casting dies etc.

FILTUB UTOP Co

FILTUB UTOP 55 is basic medium alloy flux-cored wire recommended for hardsurfacing of cold and hot-working steel tools up to operating temperatures of 550°C. The deposit is tough, free of cracks and the-refore is highly resistant to deformation and impact. Weld deposit can be machined only by grinding. On base material with low weldability is recommended depositing a buffer layer with FILTUB 12B. Suitable for hardsurfacing cold and hot working tools such as: screws, nuts, dies and containers for metal tube and rod extrusion tools for manufacture of hollow bodies, hot shear blades, pressure die casting dies etc.

FILTUB UTOP Mo1

FILTUB UTOP Mo1 is medium alloy flux-cored wire recommended for hardsurfacing of cold and hot working steel tools up to operating temperatures of 550°C. The  deposit is tough, free of cracks  and therefore is highly resistant to deformation  and impact. On  base material with low weldability is recommended depositing a buffer layer with FILTUB 12B. Suitable for hardsurfacing cold and hot working tools such as: screws, nuts, dies and containers for metal tube and rod extrusion  tools for manufacture of hollow bodies, hot shear blades, pressure dies, casting dies etc.

FILTUB 112

FILTUB 112 is basic low-alloy flux-cored wire recommended for submerged arc welding non-alloyed structural steels, boiler plates, pipe steels and fine-grain structural steels. Also is suitable for welding steels with high C content as a buffer layer. This wire is used in conjuction with welding flux FB TT.

FILTUB 114

FILTUB 114 is basic medium alloy flux-cored wire recommended for submerged arc welding creep resistant steels, designed for creep strength at service temperatures up to 500°C. This wire is used in conjuction with welding flux FB TT.

FILTUB 116

FILTUB 116 is basic medium alloy flux-cored wire recommended for submerged arc welding creep resistant steels designedfor creep  strength at service temperatures up to 600°C. The weld metal must be postweld annealing at 690 - 720°C and coolingdown to 300°C in furnace. The wire is used in conjuction with welding flux FB TT.

FILTUB 118

FILTUB 118 is basic medium alloy flux-cored wire recommended for submerged arc welding creep resistant CrMo, CrMoV steels and similar cast steels, designed  for creep strength at service temperatures up to 600°C. The weld metal must be postweld annealing at 690- 20 °C, 1-2 h and cooling down to 300°C in furnace. The wire is used in conjuction with welding flux FB TT.

FILTUB 128

FILTUB 128 is basic medium alloy flux-cored wire recommended for submerged arc welding fine-grain structu-   ral steels, creep resistant and heat-treated fine-grain structural steels. The mechanical properties are dependenton the  working conditions. Optimal results are obtained at a heat input of E <22 kJ/cm and interpass tempe-temperatures must not exceed 150°C. The wire is used in conjuction with welding flux FB TT.

FILTUB 132

FILTUB 132 is basic medium alloy flux-cored wire recommended for submerged arc welding of high-strength fine-grainstructural steels. The mechanical properties are dependent on the working conditions. Optimal results are obtained at a heat  nput of E >18 kJ/ cm and interpass temperatures must not exceed 150°C. The wire is used in conjuction with welding flux FB TT.

FILTUB 136

FILTUB 136 is basic medium alloy flux-cored wire recommended for submerged arc welding fine-grain structural steels and cryolitic steels. The mechanical properties are dependent on the working conditions. Optimal results are obtained at a heat input of E <15 kJ/cm and interpass temperatures must not exceed  150°C. The wire is used in conjuction with welding flux FB TT.

FILTUB 138

FILTUB 138 is basic medium alloy flux-cored wire recommended for submerged arc welding finegrained, creep resistant finegrained and heat-treated finegrained steels. The mechanical properties are dependent on the working conditions. Optimal results are obtained at a heat input of E < 15 kJ/cm and interpass temperatures  must not exceed  150°C. The wire is used in conjuction with welding flux FB TT.

FILTUB 140

FILTUB 140 is basic medium alloy flux-cored wire recommended for submerged arc welding NiCu-alloyed steels resistant to atmosferic corrosion and fine-grain structural steels such as Corten, Patinax, Acor and similar. This wire is used in conjuction with welding flux FB TT.

FILTUB DUR 205

FILTUB DUR 205 is basic medium alloy flux-cored wire recommended for submerged arc hardsurfacing highly wear resistant applications. The deposit is tough, free of cracks and porosity and therefore is highly resistant to deformation and impact. On the base material with low weldability is recommended depositing a buffer layer with FILTUB 112. The wire is used in conjunction with welding flux  FB 12.2. Suitable for: steel mill rolls, conveyer belt wheels and rolls, rolls of caterpillar crane wheel rims, guide rolls, idling wheels dredger buckets cylinder etc.

FILTUB DUR 212

FILTUB DUR 212 is basic medium alloy flux-cored wire recommended for submerged arc hardsurfacing highly wear resistant applications. The deposit is tough, free of cracks and porosity and therefore is highly resistant to deformation and impact. On the base material with low weldability is recommended depositing a buffer layer with FILTUB 112. The wire is used in conjunction with welding flux  FB 12.2. Suitable for: steel mill rolls, conveyer belt wheels and rolls, rolls of caterpillar crane wheel rims, guide rolls, idling wheels dredger buckets cylinder etc.

FILTUB DUR 214

FILTUB DUR 214 is basic medium alloy flux-cored wire recommended for submerged arc hardsurfacing of steel machine parts subject to friction (metal to metal) and wearing at temperature up to 600°C. The weld metol is free of cracking and porosity and has ahigh resistance to load and impact conditions. On base material with low weldability is recommended depositing a buffer layer with FILTUB 112. This wire is used in conjunction with welding flux FB 12.2. Suitable for: sheet rolls, shape rolls for hot steel rolling, guilotine knives etc.

FILTUB DUR 215

FILTUB DUR 215 is basic medium alloy flux-cored wire recommended for suberged arc hardsurfacing of parts which have high resistance to wear and corrosion. The weld metal is free of cracking and porosity and has a high resistance to load and impact conditions. On base  material with low weldability is recommended depositing a buffer layer with FILTUB 112. The wire is used in conjunction with welding flux FB CrNi. Suitable for: roll bodies, components for pumps, water turbines, valves, rails, baffle and wearing plates etc.

FILTUB DUR 12Cr2NiMo

FILTUB 12Cr2NiMo is basic medium alloyed flux-cored wire recommended for submerged arc hardsurfacing of parts which have high resistance to metal-to-metal wear, corrosion and thermal fatigue. On the base material with low weldability is recommended depositing a buffer layer with FILTUB 112. The wire is used in conjunction with welding flux FB 12.2. Suitable for: continuous casting rolls, hidraulic plugers, brake drums etc.

FILTUB DUR 13Cr3NiMoV

FILTUB 13Cr3NiMoV is basic medium alloyed flux-cored wire recommended for submerged arc hardsurfacing of parts which have high resistance to metal-to-metal wear, corrosion and thermal fatigue. On the base mate-rial with low weldability is recommended depositing a buffer layer with FILTUB 112. The wire is used in conjun-ction with welding flux FB 12.2. Suitable for: continuous casting rolls, hidraulic pluger, brake drums etc.

FILTUB DUR 17 Cr

FILTUB DUR 17Cr is basic 17Cr-alloy flux-cored wire recommended for submerged arc hardsurfacing of parts which have high resistance to corrosion at high temperatures, wear and thermal fatigue. On base material with low weldability is recommended depositing a buffer layer with FILTUB 112. The wire is used in conjunction with welding flux AB Cr. Suitable for: continuous casting rolls and other rollin equipment, steam turbine parts, valve seats etc.

FILCORD 308 L

FILCORD 308L is rutile flux-cored wire suitable for welding austenitic 19/9 CrNi stainless steels. Resistant to intergranular corrosion at operating temperatures up to 350°C. It features: stable arc, low spatter, selfdetaching slag, flat notch – free weld interface and used in all – position welding.

FILCORD 316 L

FILCORD 316L is rutile flux-cored wire suitable for welding instabilised and stabilised 19/12/3 stainless steels. Resistant to intergranular corrosion at operating temperatures up to 400°C. It features: stable arc, low spatter, selfdetaching slag, flat notch–free weld interface and used in all–position welding.

FILCORD 309 L

FILCORD 309L is rutile flux-cored wire suitable for MAG welding dissimilar stainles steels and for joining highalloyed CrNiMo – steels with unalloyed steels. Siuted for service temperatures from - 60°C to 300°C. It featu-res: stable arc, low spatter, selfdetaching slag, flat notch – free weld interface and used in all – position welding.

FILCORD 307

FILCORD 307 is rutile flux-cored wire suitable for welding austenitic CrNiMn stainless steels, for dissimilar joints, welding of steels of un-own composition and difficult to weld steels, joining of 14 % Mn austenitic steels and for buffering. Service temperatures from -60°C to +300°C.

 

 

 

                

Renata Hočevar

Sales Commercialist