High alloyed for special purpose electrodes

INOX R 22/12/3 Fe

Austenitic-ferritic rutile flux-alloyed electrode for joint welding corrosion and heat resistant steels and steel castings. Suitable for joining dissimilar steels, also as a buffer layer on stainless clads on unalloyed steels.

 

INOX B 18/8/6

Basic coated, austenitic electrode for welding low and high alloyed steels. Scaling resistant up to 800°C and low-temperature toughness down to -100°C. Preheating and postweld heat treatment as required by the base metal.

 

INOX R 18/8/6 Fe

Austenitic rutile, flux-alloyed, high-efficiency electrode for joining dissimilar steels, for welding corrosion resistant steels and steels that are not readily weldable. This electrode yields tough between-layers in hardsurfacing operations. The weld metal has strain hardenability, cracking resistance, cavitation resistance, thermal shock resistance, scaling resistance up to 800°C and low temperature toughness down to -100°C.

 

INOX R 18/8/6

Austenitic rutile - basic, electrode for joining dissimilar steels, for welding corrosion resistant steels and steels that are not readily weldable. This electrode yields tough between-layers in hard -surfacing operations. The weld metal has strain harden-ability, cracking resistance, cavitation resistance, thermal shock resistance, scaling resistance up to 800°C and low temperature toughness down to -100°C.

 

INOX R 29/9

Rutile, austenitic ferritic electrode for welding dissimilar and »difficult to weld« steels. Suitable for interpass hardfacing. Because of high mechanical strength and starain hardenability suitable for wear resistant buildups on gear wheels, shafts,… The weld metals has excellent cavitation and cracking resistance.

 

INOX R 29/9 Fe

Rutile sintetic austenitic ferritic electrode with high recovery (160%) for welding dissimilar and »difficult to weld« steels. Suitable for interpass hardfacing. Because of high mechanical strength and starain hardenability suitable for wear resistant buildups on  gear wheels, shafts,… The weld metals has excellent cavitation and cracking resistance.

 

INOX B 70/15

Special basic coated Ni-base core wire electrode for welding in low-temperatury industry and in atomic industry. Suited for service temperatures for –196°C to 600°C, otherwise up to scaling resistance temperature of 1200°C (S-free atmosphere). Thermal shock resistant to fully austenitic steels, highly resistant to hot cracking and corrosion resistant at high temperautes. Preheating as required by the base metal, interpass temperatures 125 - 150°C.

PRODUCTS EN 1600 / ISO 3581 * DIN 8556/DIN 1736 * A-5.4 / 5.11 *
INOX R 22/12/3 Fe E 23.12.2R 160 33X* / E 309Mo-16
INOX B 18/8/6 E 18 8 Mn B 22 E 18 8 Mn B 20+ ~ E 307-15
INOX R 18/8/6 Fe E 18 8 Mn R 53 E 18 8 Mn MPR33 160 ~ E 307-16
INOX R 18/8/6 E 18 8 Mn R 12 E 18 8 Mn R 26 E 307-17
INOX R 29/9 E 29 9 R 12 E 29 9 R 26 E 312-17
INOX R 29/9 Fe E 29 9 R 53 E 29 9 R 26 E 312-26
INOX B 70/15 / EL NiCr 15 Fe Mn * E NiCrFe-3 *

Renata Hočevar

Sales Commercialist