High alloyed electrodes for hardfacing

UTOP 38

 Basic Mo, Cr, V flux-alloyed electrode  with high toughness, wear, heavy impact resistance and easy machinable  weld metal. It is suitable for hardfacing cold and hot working tools, for correction of cavities, like die blocks, dies and containers for metal tube and rod extrusion tools for manufacture of hollow bodies, screws, nuts, rivers and bolts, pressure die casting dies, die insert, …

 

UTOP 55

 Basic Mo, Cr, V flux-alloyed electrode with high toughness, wear and heavy impact resistance. The weld metal can be treated with grinding and cut after soft annealing. It is suitable for hardfacing cold and hot working tools, like die blocks, dies and containers for metal tube and rod extrusion, tools for manufacture of hollow bodies, screws, nuts, rivers and bolts, pressure die casting dies, die insert, hot shear blades…

 

TOOLDUR

 Basic Mo, Cr, W,V flux-alloyed electrode for building up new and resurfacing warn parts of tools and machines also at high temperatures. It is suitable for building up and repairing tools of high speed steel, for resurfacing beads, shears, knives… The weld metal can be treated with grinding and cut after soft annealing.

 

E DUR 250

 Basic, Cr flux-alloyed electrode for surfacing applications where medium  hardness is required. It gives wear and heavy impact resistant weld metal, suitable for machine parts exposed to wear, cog wheels, tracks etc… The deposit can not be hardened.

 

E DUR 300 

 Basic, Cr flux-alloyed electrode for surfacing applications where medium hardness is required. It gives wear and heavy impact resistant weld metal, suitable for machine parts exposed to wear, cog wheels, tracks etc…

 

E DUR 400

 Basic, Cr-Mn flux-alloyed electrode for surfacing applications. It gives wear and heavy impact resistant weld metal, suitable for machine parts exposed to wear, machines for structural engineering, cog wheels, chain wheels, tracks etc…

 

 

E DUR 500

 Basic coated electrode for very hard buildups on excavator components such as bucket edges, chain links, cutting tools, dies, etc.

 

E DUR 600

 Electrode is used for surfacing of steel parts when heavy impact resistance is needed. Welding material posses higher abrasion resistance. Suitable for surfacing parts exposed to heavy abrasive wear by stone, coal, sand etc… The weld metal can be treated with grinding and cut after soft annealing.

 

E DUR 60 R 

 Rutile electrode is used for surfacing of steel parts when heavy impact resistance is needed. Welding material posses higher abrasion resistance. Suitable for surfacing parts exposed to heavy abrasive wear by stone, coal, sand etc… The weld metal can be treated with grinding and cut after soft annealing.

 

E DUR 600 Si

 Basic Cr and Si alloyed electrode is used for surfacing of steel parts when heavy impact resistance is needed. Welding material posses higher abrasion resistance. Suitable for surfacing parts exposed to heavy abrasive wear by stone, coal, sand etc… The weld metal can be treated with grinding and cut after soft annealing..

 

TOOLDUR Co

 Special electrode with Co, for hot wear resistant surfacing on hot working tools, where high temperature change and stress are present, as: cast tools, trimming tools, extrusion press tools, hot flow presses for steels, hot shearing- machines.. Optimal operating temperatures are till 650°C, resistant to scaling to 900°C, weld metal is nitratable. The weld metal is machinable. When surfacing low alloy steel, -4 layers are required.

PRODUCTS EN 14700 DIN 8556 A-5.13
UTOP 38 E Fe 3 E 3-UM-40-T /
UTOP 55 E Fe 4 E 6-UM-60-T /
TOOLDUR E Fe 4 E 4-UM-60-65 S E Fe 5-B
E DUR 250 E Fe 3 E 1-UM-250 /
E DUR 300 E Fe 1 E 1-UM-300 /
E DUR 400 E Fe 3 E 1-UM-400 /
E DUR 500 E Fe 3 E 1-UM-50 /
E DUR 600 E Fe 8 E 6-UM-60 /
E DUR 60 R E Fe 8 E 6-UM-55 /
E DUR 600 Si E Fe 8 E 6-UM-55 /
TOOLDUR Co E Fe 3 ~ E3-UM-50-CTZ /
E DUR Cr 13 E Fe 8 E 5-UM-CGP /

Renata Hočevar

Sales Commercialist